Robotics

On Day One we made the 5 minute bot.
We got to make it move forward.
Also we made it turn left or right.
At the end of the day we had to make the robot go in a square.
Here is the coding for the square.
It took half of day two to complete this.
I had a little trouble with the drive time I had to fix it.

Scatterbot

On day three we played scatterbot were all of our robots tried to compete with each other.
We lasted for about 30 seconds in the ring.
Ours got tangled in other robot the cord then it fell over.
Here is a picture of our Robot we made.


Drawing a Square

Next we programmed the robot to walk in a square.
This is the code we needed:

Mars Challenge

In The mars challenge our robot used a ultrasonic sensor to messure the distance between the floor and the robot.
The goal was to see if the robot can find water on mars with the color sensors we had gotton.
The water was just a piece of blue paper.