My Computers Trouble Shooting Page
Troubleshooting Activity .
Today we changed up our servers in small almost unnoticeable
ways for another group to come by and try to fix it by troubleshooting.We changed up
ours by loosening a few wires and cables, then we switched the power and MLED wires,
by mistake by moving the power cable just a little, the power pulsed into the computer
making it turn off and on constantly. We also rotated the clock battery (pretty pointless)
, and that was all we did. We went over to the group next to us and turned it on and at
first it seemed fine, then we saw a lot of system checking on the screen and then
oppened it up. Everything looked fine but we knew they changed something so we looked
over every inch, and we noticed that the cords that we changed on ours, they had also
changed. So we plugged them back in and booted it up, but still the same result, so we
asked Chris for help. He told us that that is normal for this type of computer if
it is shut down incorrectly and said that it worked so we were done. Today I learned
today is that even the tiniest change can darasticly change the outcome. We just
changed one wire nd moved it over one slot and it made the computer pulsate with power
instead of an even, satble power.
Home